张加兵,傅燕鸣,王居正.基于UG的通用凸轮曲线二次开发技术[J].轻工机械,2011,29(6): |
基于UG的通用凸轮曲线二次开发技术 |
Secondary Development Technologies of Universal Cam Curve by UG Software |
|
DOI: |
中文关键词: 机械学 凸轮 UG软件 通用凸轮曲线 二次开发 |
英文关键词:mechanisms cam UG software universal cam curve secondary development |
基金项目:上海大学创新基金项目——共轭凸轮-连杆式递纸机构的设计与研究(2009-11) |
张加兵 傅燕鸣 王居正 |
上海大学 机电工程与自动化学院,上海 200072 |
摘要点击次数: 2721 |
全文下载次数: 1209 |
中文摘要: |
凸轮曲线是凸轮驱动从动件的运动曲线,它影响到凸轮机构的效率、精度以及寿命,故在凸轮设计中十分重要。为快速有效地进行凸轮机构设计,[HTH]总结推导了通用凸轮曲线公式,综合应用Visual C++6.0、UG/OPEN MenuScript、UG/OPEN UIStyler和UG/OPEN API等开发工具,开发了基于UG软件的通用凸轮设计模块,提高了凸轮机构设计效率。 |
英文摘要: |
A curve of cams movement trace of given cam follower. Greatly impacts the efficiency, precision and lifespan of the cam mechanism, so it plays an important role in cam design. In order to design cam mechanism fast and effectively, the equations of general cam were derived and summarized. Furthermore through comprehensive applications of Visual C++6.0,UG/OPEN MenuScript,UG/OPEN UIStyler and UG/OPEN API etc. development tools, based on UG software, a general cam design model with higher efficiency was developed. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |