冯 铭,姚蔚峰,周文华,孙 磊,邓乾发,吕冰海.基于双平面圆柱滚子研磨技术的工艺优化[J].轻工机械,2014,32(3): |
基于双平面圆柱滚子研磨技术的工艺优化 |
Process Optimization of Cylindrical Roller Lapping Technology Based on Double-side Lapping Methods |
|
DOI:IO. 3969/j. issn. 1005 -2895. 2014. 03. 007 |
中文关键词: 轴承 双平面研磨 圆柱滚子 磨粒 正交实验设计 |
英文关键词:bearing double -side lapping cylindrical roller abrasive orthogonal experimental design |
基金项目:国家自然科学基金项目( 51175468);浙江省自然科学基金重点项目(21110794) |
|
摘要点击次数: 1330 |
全文下载次数: 1056 |
中文摘要: |
圆柱滚子是轴承的重要组件,随着对设备仪器性能的要求不断提高,对圆柱滚子的精度和一致性要求也越来越
高。文章分析行星式双平面研磨方式下磨料粒度、研磨盘转速、夹具孔偏角对圆柱滚子的加工精度的影响情况。文中首
先基于正交实验设计了标准的L9(34)正交表,并严格按照正交表中的实验序号进行了圆柱滚子的加工实验,然后采用
信噪比和ANOVA方差法对加工结果进行数据分析,最终获得了参数的最优组合。根据优化的研磨条件进行加工,结果
显示圆柱滚子的圆度、直线度以及平行度均达到了1μm以下,优化效果显著。 |
英文摘要: |
The rolling element is the most important component of rolling bearings. Its geometric accuracy and
consistency affects the performance and working life of bearings greatly. A standard taguchi L9 ( 34) orthogonal array
( oa) was designed to analyze abrasive size, rotating speed of plates, deflection angle of carrier holes and other factors
impacting on precision of cylindrical roller process and achieved the optimized parameters combination by adopting
evaluation of signal-to-noise ratio and ANOVA analysis( analysis of variance) . Under the optimized lapping condition,
the better roundness, straightness and the parallelism of the cylindrical roller was achieved. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |