赵志杰, 唐博, 姜阳.全自动分币系统设计[J].轻工机械,2018,36(3):57-61 |
全自动分币系统设计 |
Design of Fully Automatic Coin Separation System |
|
DOI:10.3969/j.issn.1005 2895.2018.03.011 |
中文关键词: 全自动分币 曲柄连杆机构 硬币数量计量 北斗定位 2.4G无线通信网络 PC监测 |
英文关键词:fully automatic coin separation crank mechanism coins count dipper positioning 24G wireless communication network PC
monitoring |
基金项目:国家级大学生创新创业项目:半自动硬币分离包装机(201710143000299) |
|
摘要点击次数: 1526 |
全文下载次数: 1421 |
中文摘要: |
为了更高效地实现对硬币的分离计数,课题组设计了全自动硬币分币系统。系统采用曲柄连杆等机构设计分币装置:利用孔板对不同种类的硬币进行分离
;采用Flexiforce压力传感器对硬币数量进行计量,并将计量结果显示在LCD1602液晶显示屏上;利用GPS/BDS双模定位模块对分币机进行定位与定时;利用MPU
9250模块测量装置的水平倾角,并利用2.4G无线通信模块将获取的硬币数量与币种信息以及装置安全信息发送给PC端监测软件。课题组研究了系统的软硬件设计
,并给出了实验测试结果。结果表明:系统可以准确分离硬币并计数,且可以将计数结果发送至远程的PC端监测软件。研究对实现全自动化分币具有一定的意义
。 |
英文摘要: |
In order to separate and count the coins more efficiently, the research group design the fully automatic coin separation system. The system adopted
the crank connecting rod to design the denomination device, using the orifice plate to separate the coins, using the Flexoforce pressure sensor to get the number of coins, sending the
measurement results to LCD1602 LCD screen, using GPS/BDS dual mode positioning module to get positioning and time, using MPU 9250 module to get device horizontal tilt, using
the 2.4G wireless communication module to send the numbers and types of coins and device security information to the PC monitoring software. The software and hardware design of the
system was studied and the experimental results were given.The results show that the system can accurately separate and count the coins, send the results to PC terminal monitoring
software. This study has a certain significance to realize fully automatic coin separation. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |