袁卫明, 陈法鑫, 曹宜荣, 黄俊, 王依群.伺服注塑机高速响应的液压控制系统[J].轻工机械,2018,36(5):87-91 |
伺服注塑机高速响应的液压控制系统 |
Hydraulic Control System of High Speed Response for Servo Injection Molding Machine |
|
DOI:10.3969/j.issn.1005 2895.2018.05.017 |
中文关键词: 伺服注塑机 薄壁注塑 响应时间 高速响应 成型条件 |
英文关键词:servo injection molding machine thin wall injection response time high speed response molding conditions |
基金项目: |
|
摘要点击次数: 1444 |
全文下载次数: 2262 |
中文摘要: |
〖HK44〗〖HT5”H〗摘要:目前标准伺服注塑机进行薄壁注塑时,因注射速度无法满足成型条件,存在塑件成型不满或变形等缺陷,笔者提出了一种伺服注塑机
高速响应的液压控制系统。也就是在标准伺服注塑机液压控制系统上增加模块化液压控制。该模块化液压控制采用比例压力阀、压力传感器和方向阀来替换原电
机泵输出压力的伺服控制,以提高伺服电机启动加速响应速度,构成一种伺服电机启动加速时间为零的高速响应注塑液压系统。试验表明在不增加动力源功率状
况下,该系统也能够改善薄壁注塑成型的缺陷问题。 |
英文摘要: |
In view of the defects such as the underfill and deformation of the plastic parts in the process of thin wall injection molding by standard servo
injection molding machine, that the reason is the injection speed cannot meet the molding conditions. A hydraulic control system for high speed response of servo injection mold machine
was proposed by means of adding modular hydraulic control system to the standard servo injection molding machine. The proportional pressure valve, pressure sensor and direction valve
were used to replace the servo control of the output pressure of the original electric motor pump. The servo motor start acceleration response speed was improved and a high speed
response injection hydraulic system with a servo motor start acceleration time of zero was established. The research show that the defects of thin wall injection molding can be improved
without increasing the power capacity. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |