欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院
  • 主办单位:轻工业杭州机电设计研究院、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
袁飞, 吕彦明, 王康, 刘东帅, 杨华.基于Top Down的静压箱参数化设计[J].轻工机械,2019,37(6):21-24
基于Top Down的静压箱参数化设计
Parametric Design of Static Pressure Box Based on Top Down
  
DOI:10.3969/j.issn.1005 2895.2019.06.005
中文关键词:  静压箱  参数化设计  自顶向下  3D骨架模型  SolidWorks二次开发
英文关键词:static pressure box  parametric design  top down  3D skeleton model  SolidWorks secondary development
基金项目:国家自然科学基金资助项目(61409230303)。
作者单位
袁飞, 吕彦明, 王康, 刘东帅, 杨华 (江南大学 江苏省食品先进制造装备技术重点实验室 江苏 无锡214122) 
摘要点击次数: 97
全文下载次数: 89
中文摘要:
      针对风机静压箱设计难度大、柔性差和图形难修改等问题,课题组采用自顶向下(top down)设计方法,建立静压箱3D骨架模型,借助该模型实现对静压箱各零件的装配约束。并以SolidWorks的宏录制功能为二次开发工具,利用Visual Basic语言开发集静压箱三维装配模型与二维工程图于一体的交互式参数化设计系统,实现了静压箱的设计自动化。实验证明,该系统可根据工程实际需求方便快捷地对风机静压箱进行设计与修改,极大地提高了开发效率。该方法也将为众多领域的产品研发设计提供参考。
英文摘要:
      In view of the problems of difficult, poor flexibility and difficult modification of graphics of fan static pressure box, the top down design method was used to establish the 3D skeleton model of the static pressure box, and the parts of the static pressure box were constrainted by the model. With the macro recording function of SolidWorks as the secondary development tool, the interactive parameterized design system integrating the three dimensional assembly model of static pressure box and two dimensional engineering drawing was developed by using Visual Basic language, and the design automation of static pressure box was realized. The experiment proves that the system can design and modify the static pressure box of the fan conveniently and quickly according to the actual needs of the project, which greatly improves the development efficiency. At the same time, this method will also provide reference for product development and design in many fields.
查看全文  查看/发表评论  下载PDF阅读器
关闭