| 王诚意， 王琨， 董康， 蔡嘉辉， 宁萌.基于WinCC与OPC技术的车间数字化管理与控制系统设计[J].轻工机械,2019,37(6):99-104 |
| 基于WinCC与OPC技术的车间数字化管理与控制系统设计 |
| Design of Workshop Digital Management and Control System Based on WinCC and OPC Technology |
| |
| DOI：10.3969/j.issn.1005 2895.2019.06.019 |
| 中文关键词: 生产监控 数字化车间 数据采集 WinCC软件 OPC标准 |
| 英文关键词:production monitoring digital workshop data acquisition WinCC OPC（OLE for Process Control） |
| 基金项目:国家自然科学基金项目（51505190）；江苏省食品制造装备重点实验室开放项目（FMZ201804）。 |
|
| 摘要点击次数: 1169 |
| 全文下载次数: 1239 |
| 中文摘要: |
| 针对传统塑压产品制造车间生产与管理水平低下等问题，提出了基于WinCC与OPC技术的数字化车间的建设方案。使用WinCC作为上位机软件开发了车间数字化管理与控制系统，该系统具有生产管理、生产监视、设备控制和数据归档等功能；采用工业以太网与OPC通信协议进行与企业资源管理系统的通信，通过串口通信与OPC服务器采集实时生产数据。该数字化管理与控制系统的应用提高了企业的生产效率与管理水平，为传统制造企业向数字化制造方向的迈进提供参考。 |
| 英文摘要: |
| Aiming at the low level of production and management in traditional plastic pressing workshop, the construction scheme of digital workshop based on WinCC and OPC technology was put forward. The workshop digital management and control system were developed by using WinCC as upper computer software.The system had the functions of production management, production monitoring, equipment control and data filing. Industrial Ethernet and OPC communication protocol were used to communicate with enterprise resource management system. Real time production data were collected with OPC server through serial communication.The application of this digital management and control system improves the production efficiency and management level of enterprises, and promotes the traditional manufacturing enterprises to move towards the direction of digital manufacturing. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
