欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
李思聪, 唐正宁.小剂量灌装机理瓶机构优化设计[J].轻工机械,2020,38(3):15-18
小剂量灌装机理瓶机构优化设计
Optimization of Structures for Sorting Small Does Tubes in Filling Mechanism
  
DOI:10.3969/j.issn.1005 2895.2020.03.003
中文关键词:  包装机械  理料机构  四杆机构  解析法  ADAMS软件
英文关键词:packaging machine  unscramble bottle body structure  four bar linkages  analytic method  ADAMS
基金项目:
作者单位
李思聪, 唐正宁 江南大学 机械工程学院 江苏 无锡214122 
摘要点击次数: 118
全文下载次数: 99
中文摘要:
      针对目前小剂量灌装机的人工上料存在效率低下、安全卫生不达标等问题,课题组提出一种基于四杆机构的理瓶机构方案。运用解析法对理料机构进行了结构分析,针对四杆机构特性创建平面简图,采用解析法针对其运行过程中的运动学理论进行分析计算;采用ADAMS软件对目标机构进行建模与仿真分析,并以四杆机构曲柄、连杆、摇杆长度为设计变量,以压力角最小为目标,各杆件之间相互关系为约束条件,进行优化设计得到最优解,使压力角减少了19.6%。优化设计有效解决了原灌装机全自动理料效率低的问题,并通过ADAMS软件对目标机构的优化设计进一步提升了传动效率。
英文摘要:
      Aiming at the problems of low efficiency and unsatisfied safety and health in manual feeding of small dose filling machine at present,an unscramble bottle body scheme based on four bar linkage mechanism was put forward according to the packing materials technical requirements.The structure of material handling mechanism is analyzed by analytic method.In view of the characteristic of four bar linkage to create graphic diagram, analytic method was adopted to analyze the kinematics theory for its operation process calculation. ADAMS software modeling and simulation analysis were carried out on the goal mechanism, with four bar linkage crank connecting rod rocker arm length as design variables, the minimum pressure angle as the goal,the relationship between bars as constraint conditions, optimized design to get the optimal solution,reducing the pressure angle by 19.6%. The optimization design effectively solves the problem of low efficiency of the original filling machine automatic bedding material process, further improves the transmission efficiency through the optimization design of target mechanism by ADAMS software.
查看全文  查看/发表评论  下载PDF阅读器
关闭