| 张育玮， 姚廷强， 刘志明， 成鑫.薄壁4点接触球轴承保持架稳定性研究[J].轻工机械,2021,39(1):1-6 |
| 薄壁4点接触球轴承保持架稳定性研究 |
| Stability Study of Thin Walled Four Point Contact Ball Bearing Cage |
| |
| DOI：10.3969/j.issn.1005 2895.2021.01.001 |
| 中文关键词: 薄壁4点接触球轴承 多体动力学 赫兹接触理论 冲击函数法 ADAMS |
| 英文关键词:thin walled four point contact ball bearing multi body dynamics Hertz contact theory impact function method ADAMS |
| 基金项目:国家自然科学基金项目：高性能滚动轴承 螺旋锥齿轮系统柔性多体接触动力学研究(11462008)。 |
|
| 摘要点击次数: 563 |
| 全文下载次数: 0 |
| 中文摘要: |
| 为了对薄壁4点接触球轴承进行优化设计，课题组研究了不同保持架对轴承力学性能的影响。依据多体动力学理论和赫兹接触理论，运用冲击函数法对薄壁4点接触球轴承定义接触；基于ADAMS建立薄壁4点接触球轴承的多刚体模型；对比单工况时采用滚珠引导的保持架角速度和滚珠自转速度的仿真结果与理论值。分析结果表明：在同工况下，保持架Ⅰ和保持架Ⅱ与滚珠的接触力比保持架Ⅲ要大；保持架Ⅱ的质心轴向振动位移大，而保持架Ⅲ质心轴向振动位移小，运动稳定；保持架Ⅲ在X，Y方向的质心涡动轨迹范围小，表现稳定。 |
| 英文摘要: |
| Aiming at the optimization design of thin walled four point contact ball bearings, the influence of different cages on the mechanical properties of the bearing was analyzed. According to the multi body dynamics theory and Hertz contact theory, the impact function method was used to define the contact of the thin walled four point contact ball bearing. Based on ADAMS, the multi body model of the thin walled four point contact ball bearing was established. Simulation results and theoretical values of cage angular velocity and ball rotation velocity under single working condition were compared by using ball guide. The analysis results show that under the same working conditions, the contact force between the cage Ⅰ and the cage Ⅱ with the ball is greater than that of the cage Ⅲ; the axial vibration displacement of the center of mass of the cage Ⅱ is larger, the axial vibration displacement of the center of mass of the cage Ⅲ is small, and the movement is stable; the range of the vortex trajectory of the center of mass of the cage Ⅲ in the X and Y directions is small and the performance is stable. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
