欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
张强强, 许勇, 赵传森, 董飞, 王艳.单自由度弹跳机构的跳跃稳定性研究[J].轻工机械,2021,39(1):29-35
单自由度弹跳机构的跳跃稳定性研究
Study on Jumping Stability of Single Degree of Freedom Spring Mechanism
  
DOI:10.3969/j.issn.1005 2895.2021.01.006
中文关键词:  弹跳机器人  单自由度  Stephenson Ⅱ型6杆机构  闭环矢量方程法  起跳角度  Fmincon函数
英文关键词:hopping robot  single degree of freedom  Stephenson type Ⅱ six bar mechanism  closed loop vector equation method  take off angle  Fmincon function
基金项目:
作者单位
张强强, 许勇, 赵传森, 董飞, 王艳 上海工程技术大学 机械与汽车工程学院 上海201620 
摘要点击次数: 599
全文下载次数: 0
中文摘要:
      为探究弹跳机器人的起跳稳定性,课题组从机构设计的角度出发,根据蝗虫的腿部结构,提出了一种单自由度6杆弹跳腿机构。以Stephenson Ⅱ型6杆机构为弹跳腿,首先利用闭环矢量方程法进行运动学分析,确定弹跳腿机构的运动学稳定性满足弹跳机器人的起跳需求;然后,对6杆弹跳腿机构的起跳阶段进行分析,确定弹跳机构在起跳时的起跳角度,并通过多约束条件的数学方法确定弹跳机构的杆件尺寸;而后,对弹跳机构的动态稳定性分析,确定机构的质心位置和总惯性矩,确保起跳过程不发生翻转,总惯性矩的变化越小,弹跳腿机构动态稳定性越好;最后,进行实例验证,用MATLAB中Fmincon函数对实例进行求解。结果表明此单自由度弹跳腿机构设计具有良好的弹跳稳定性。
英文摘要:
      In order to investigate the stability of the hopping robot during the take off process, a single degree of freedom six bar spring leg mechanism based on the locust′s leg structure was proposed. Taking Stephenson Type Ⅱ six bar mechanism as a spring leg, the kinematics analysis was carried out firstly by using the closed loop vector equation method to determine the kinematic stability of the spring leg mechanism to meet the take off requirements of the hopping robot. Secondly, the take off phase of the six bar spring leg mechanism was analyzed to determine the take off angle of the mechanism during the take off, and the spring machine was determined by the mathematical method of multi constraint conditions. Then the dynamic stability of the mechanism was analyzed to determine the position of the center of mass and the total moment of inertia of the mechanism to ensure that the take off process does not overturn. The smaller the change of the total moment of inertia, the better the dynamic stability of the spring leg mechanism. Finally, the example verification was carried out and the fmincon function in MATLAB was used to solve the case, which proved that the design of the single degree of freedom spring leg mechanism has good spring stability.
查看全文  查看/发表评论  下载PDF阅读器
关闭