欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
李淑江, 李程前, 沈敏敏.基于FLUENT的气液两相流喷嘴雾化性能研究[J].轻工机械,2021,39(6):81-85
基于FLUENT的气液两相流喷嘴雾化性能研究
Improvement of Atomization Performance of Gas Liquid Two Phase Flow Nozzle Based on FLUENT
  
DOI:10.3969/j.issn.1005 2895.2021.06.013
中文关键词:  雾化器喷嘴  气液两相流  雾化  气相通道出口斜度  气液比  气相压力
英文关键词:atomizer nozzle  gas liquid two phase flow  atomization  slope of the air outlet  gas liquid ratio  gas pressure
基金项目:
作者单位
李淑江, 李程前, 沈敏敏 青岛科技大学 机电工程学院 山东 青岛266061 
摘要点击次数: 801
全文下载次数: 704
中文摘要:
      为了提升雾化器的雾化性能,对雾化器喷嘴结构进行研究。以空气和水为介质,采用FLUENT软件仿真模拟喷嘴雾化过程并利用试验加以验证。以不同角度的气相出口通道为研究对象,通过调整气压、气液比的大小探究喷嘴在其影响下的喷雾效果。研究结果表明:随着气相通道斜度增大,可以提高喷嘴的雾化质量,当气相通道斜度过大时,也会影响雾化效果;同时,喷雾效果也受气压、气液比的影响,随着气压、气液比的变大,雾滴粒径逐渐变小,雾化性能更好。
英文摘要:
      To enhance the atomization performance of atomizer, structure of atomizer nozzle was studied. The nozzle atomization process was simulated with air and water as medium by FLUENT software and verified by test; the nozzle spray effect was explored by adjusting the air pressure and gas liquid ratio with different angle of gas phase exits as the research object. The results show that the atomization performance of the atomizer nozzle is improved with the increase of the slope of the air outlet, and the atomization performance is reduced when the slope of the air outlet is too large. With the increase of gas pressure and gas liquid ratio, the drop diameter gradually decreases, and the atomization performance is better.
查看全文  查看/发表评论  下载PDF阅读器
关闭