欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
梁高翔, 王青*, 吕绪山, 党帅, 李佐超.喷气涡流纺喷嘴参数对内流场特性的影响[J].轻工机械,2023,41(1):16-22
喷气涡流纺喷嘴参数对内流场特性的影响
Influence of Nozzle Parameters on Internal Flow Field Characteristics of Air Jet Vortex Spinning
  
DOI:10.3969/j.issn.1005 2895.2023.01.003
中文关键词:  喷气涡流纺  喷嘴  导引针  流场特性  FLUENT
英文关键词:air jet vortex spinning  nozzle  guiding needle  flow field characteristics  FLUENT
基金项目:中国纺织工业联合会科技指导性项目(2021019)。
作者单位
梁高翔, 王青*, 吕绪山, 党帅, 李佐超 西安工程大学 机电工程学院 陕西 西安710048 
摘要点击次数: 129
全文下载次数: 127
中文摘要:
      为探究高速气流在喷气涡流纺内流道的流场特性规律,课题组基于FLUENT建立喷嘴的参数化模型,采用单一变量法分别研究喷孔数量、喷孔倾角和供气压力对喷嘴内流场的影响。结果表明:受引导部件的影响,内流场气流特性分别存在不规则性,且有较多的回流和涡流现象的存在;随着喷孔数量的增加,喷孔出口气流速度略有增大,内流场涡流现象减少,气流旋转性能显著增强;随着喷孔倾角的增大,气流速度峰值先增大后减小,导引部件螺旋面两侧的轴向速度和切向速度分布有明显不同,而当喷孔倾角超过70°后角度对速度的影响逐渐减弱;随供气压力的增加,气流速度增大,气流旋转特性增强,纱线加捻效果有所提高。该研究对于喷气涡流纺喷嘴的结构设计具有参考价值。
英文摘要:
      In order to explore the flow field characteristics of high speed airflow in the flow channel of air jet vortex spinning, a parametric model of nozzle based on FLUENT was established, and the single variable method was used to study the effects of the number of nozzle holes, nozzle inclination angle and air supply pressure on the flow field in the nozzle. The results show that under the influence of the guiding components, the air flow characteristics in the internal flow field are irregular, and there are more reflux and eddy current phenomena. With the increase of the number of orifices, the airflow velocity at the outlet of the orifice slightly increases, the eddy current phenomenon in the internal flow field decreases, and the airflow rotation performance is significantly enhanced. With the increase of nozzle angle, the peak airflow velocity first increases and then decreases, and the axial velocity and tangential velocity distribution on both sides of the helical surface of the guiding components are obviously different. When the nozzle angle exceeds 70°, the influence of the angle on the velocity gradually weakens. With the increase of air supply pressure, the air flow velocity increases, the air flow rotation characteristics are enhanced, and the yarn twisting effect is improved. The research has reference value for the structure design of air jet vortex spinning nozzles.
查看全文  查看/发表评论  下载PDF阅读器
关闭