佘匡华,陶振刚,廖秋慧.基于SolidWorks及ANSYS对集成块优化设计[J].轻工机械,2014,32(2): |
基于SolidWorks及ANSYS对集成块优化设计 |
Optimization Design for Manifold Based on SolidWorks and ANSYS |
|
DOI:IO. 3969/j. issn. 1005 -2895. 2014. 02. 009 |
中文关键词: 液压阀块 建模 有限元分析 优化设计 |
英文关键词:hydraulic valve block modeling finite element analysis ( FEA) optimization design |
基金项目:上海工程技术大学科研创新项目( 13 KY0517);上海工程技术大学科技成果转化专项资助项目(2012zh02);民用飞
机平尾壁板时效变形工艺研究项目(B-8932-13 -011) |
|
摘要点击次数: 1387 |
全文下载次数: 1233 |
中文摘要: |
为解决复杂液压阀块在传统设计制造过程中工作量大、易出错、效率低等困难,采用SolidWorks三维软件对其进
行设计和前处理,可提高工作效率,减轻工作强度。再结合ANSYS分析软件,对集成块进行强度应力分析,以保证制品
的可靠性。最终使阀决达到集成化程度高、性能优越的特点,达到优化设计的目的。 |
英文摘要: |
In order to solve the heavy workload , error-prone and low efficiency in the traditional design and manufacture
process of complex hydraulic valve block. the use of SolidWorks three-dimensional software can improve work efficiency,
and reduce labor intensity. Combined with ANSYS analysis software. stress analysis on the strength manifold could
ensure the reliability of products. Eventually optimization of design can be realized that the valve block can achieve a
high degree of integration and superior performance. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |