欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
华 刚,吴卫国,邹 炜,凌 斌,孙 超.新型叶丝限长设备[J].轻工机械,2014,32(6):
新型叶丝限长设备
New Equipment of Restriction of Cut Tobacco Length
  
DOI:IO. 3969/j. issn. 1005 -2895. 2014. 06. 019
中文关键词:  烟草机械  叶丝限长  烟丝结构  长丝率  中丝率
英文关键词:tobacco machinery  restriction of cut tobacco length  cut tobacco structure  the rate of cut tobacco with long size  the rate of cut tobacco with middle size
基金项目:
作者单位
华 刚,吴卫国,邹 炜,凌 斌,孙 超 南昌卷烟厂江西南昌 330096 
摘要点击次数: 1353
全文下载次数: 1190
中文摘要:
      为大幅降低叶丝长丝率,改善烟丝结构,设计了一种叶丝限长设备。该设备的部件通过键联方式连接,并可通过 调整打辊的间隙套的厚度和改变方刀之间的间隙,获得所需烟丝限长效果,具有操作简单、拆装方便、成本较低、适应性 强的特点。实际应用效果表明:应用前后叶丝的长丝率降低约7%和叶丝的中丝率提高约4%,可见,这种设计能够有效 改善烟丝分布的均匀度,减少卷烟燃烧端掉落现象的发生。
英文摘要:
      ln order to reduce the rate of cut tobacco with long size substantially and improve cut tobacco structure effectively , the equipment used for restriction of cut tobacco length was developed. The assembly units on this equipment are jointed by shaft key and designed identically. The different restriction effect of cut tobacco length can be gained just by adjusting thickness of roller gap bridging and gap between the square cutters. This equipment is easy to operate, simple to maintain. cost-effective and adaptable. The practical effect of its application showed that this equipment could lower the rate of cut tobacco with long size by about 7% and increase the rate of cut tobacco with middle size by about 4% before and after this application. Thus it can be seen that this design could improve the equilibrium of distribution of cut tobacco and decrease the frequency of falling fire end effectively.
查看全文  查看/发表评论  下载PDF阅读器
关闭