欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
胡维庆.步进电机细分驱动系统设计[J].轻工机械,2016,34(3):
步进电机细分驱动系统设计
Design of Subdivision Driving System for Stepping Motor
  
DOI:10.3969/j.issn.1005-2895.2016.03.013
中文关键词:  步进电机  驱动系统  细分驱动技术  恒流斩波  ATmega128单片机
英文关键词:stepping motor  driving system  subdivision driving technology  constant current chopper  ATmega128
基金项目:
作者单位
胡维庆 浙江机电职业技术学院电气电子工程学院浙江杭州 310053 
摘要点击次数: 1616
全文下载次数: 1320
中文摘要:
      为了提高步进电机的运行精度,消除或减小振动现象,文章基于细分驱动技术,以单片机ATmega128为核心,应用恒流斩波PWM发生电路和H桥功率驱动电路设计了步进电机的驱动系统。系统控制参数通过上位机设定,以串口通信传给单片机。实验结果表明:电机运行平稳,振动噪音小,转矩大,精度高,系统具有良好的应用前景。
英文摘要:
      ln order to improve the running system of the stepping motor and to eliminate or reduce its vibration. the driving system for stepping motor was designed in this paper based on the subdivision driving technology, which used microcontroller ATmega128 as the core and PWM generation as the constant current chopping circuit and H power bridge circuit. The controlling parameters were set on PC . which was transferred to microcontroller through the serial port. The experimental results showed that the system had good performance. running smoothly with small vibration noise, large torque and high precision.
查看全文  查看/发表评论  下载PDF阅读器
关闭