欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
赵勇, 周志峰, 肖鹏.微型断路壳上料控制系统设计[J].轻工机械,2018,36(6):53-56
微型断路壳上料控制系统设计
Design of Miniature Breaking Circuit Feeding Control System
  
DOI:10.3969/j.issn.1005 2895.2018.06.011
中文关键词:  上料控制系统  微型断路壳  伺服电机  装配生产线  PLC控制器  以太网
英文关键词:feeding control system  micro circuit breaker  servo motor  assembly line  PLC(programmable logic controller)  Ethernet
基金项目:
作者单位
赵勇, 周志峰, 肖鹏 上海工程技术大学 机械与汽车工程学院 上海201620 
摘要点击次数: 1416
全文下载次数: 1500
中文摘要:
      针对微型断路器装配过程中存在生产效率低、一致性差等缺点,提出了基于PLC控制器的微型断路壳上料控制系统。课题组设计了上料控制系统的机械结构,介绍了上料机构的组成和连接方式;采用伺服电机实现上料机构的精确控制;设计了上料控制系统的硬件组成以及工作原理;采用以太网的通信方式提高数据的传输速率;设计了控制系统的上位机显示界面。控制系统运行结果表明,断路壳上料机运行稳定、结构简单、成本低,有效提高了整个装配生产线的装配效率。
英文摘要:
      Aiming at the shortcomings of low production efficiency and poor consistency in the assembly process of miniature circuit breakers, a feeding control system for miniature circuit breakers based on PLC controller was proposed. The mechanical structure of the feeding control system was designed by the research group, the composition and connection mode of the feeding mechanism were introduced; precise control of feeding mechanism was realized through servo motor control mode. The hardware composition and operation principle of the feeding control system were designed and using Ethernet to improve data transmission rate; the upper computer display interface of the control system was designed. The operation of the control system shows that the breaker feeder is stable in operation, simple in structure and low in operating cost, can effectively improve the assembly efficiency of the entire assembly line.
查看全文  查看/发表评论  下载PDF阅读器
关闭