| 陈乐平.工艺参数对防眩板注射残余应力的影响分析[J].轻工机械,2012,30(2): |
| 工艺参数对防眩板注射残余应力的影响分析 |
| Impact Analysis of Process Parameters on Residual Stress of Anti glare Board in Injection Molding |
| |
| DOI： |
| 中文关键词: 防眩板 工艺参数 残余应力 Moldflow软件 |
| 英文关键词:anti-glare board process parameters residual stress Moldflow software |
| 基金项目:浙江省教育厅科研项目（Y200907734） |
| 陈乐平 |
| 浙江纺织服装职业技术学院 机电学院， 浙江 宁波 315211 |
| 摘要点击次数: 1851 |
| 全文下载次数: 66 |
| 中文摘要: |
| 残余应力会导致注塑制品出现应力痕、应力开裂，翘曲变形和后变形等问题，进而影响制品寿命，光学性能，电学性能和物理性能等。以防眩板为模型，利用Moldflow 软件采用有限元方法，系统分析了模具温度、熔体温度、注射速率、保压压力及玻璃纤维含量对残余应力的影响。结果表明，随注射速率和模具温度的增加残余应力增加，随保压压力、玻璃纤维含量和熔体温度的增加残余应力减小，但各因素对残余应力的影响并不一样，按其敏感程度依次是熔体温度、玻璃纤维含量、保压压力、注射速率及模具温度。 |
| 英文摘要: |
| Residual stress causes stress marks, stress cracking, warping deformation and post deformation of injection molding products and so on, thus affects the life of products, optical properties, electrical properties and physical properties, etc. The paper took the anti glare board as the model, and analyzed systematically influences on residual stress from the mold temperature, the melt temperature, the injection rate, the packing pressure and the content of glass fiber with Moldflow software. The results show that residual stress enhanced along with the increasing of injection rate and the mold temperature, and reduced along with increasing of the packing pressure, the content of glass fiber and the melt temperature, and the impact of various factors on the sensitivity of residual stress are different followed by the melt temperature, the content of glass fiber, the packing pressure, the injection rate and the mold temperature respectively. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
