| 胡霄乐，王维夫，谢剑舟.90°细弯管内稀疏气固两相流动数值研究[J].轻工机械,2015,33(1): |
| 90°细弯管内稀疏气固两相流动数值研究 |
| Numerical Study of Discrete Gas-Solid Two-Phase Flow in 900 Thin Elbows |
| |
| DOI：IO. 3969/j. issn. 1005 -2895. 2015. 01. 006 |
| 中文关键词: 细弯管 气固流动 离散相模型 分束流动 |
| 英文关键词:thin elbows gas-solid flow Discrete Particle Model( DPM) separate beams |
| 基金项目:国家自然科学基金资助项目( 51105340) |
|
| 摘要点击次数: 1462 |
| 全文下载次数: 1335 |
| 中文摘要: |
| 为了研究细弯管内稀疏气固流动条件下颗粒的分布特性，采用离散相模型( DPM)追踪颗粒行为，利用雷诺应力
模型( RSM)模拟气相的湍流流动，考虑了流体一颗粒间的双向耦合作用。通过对颗粒和气体流动行为的分析，得到了气
体压力、速度及颗粒浓度等的分布，研究了细弯管内颗粒流动行为的形成机理。结果表明：细弯管内气相压力沿流动方
向逐渐降低；弯管段内气相最大速度沿管外壁分布；水平段颗粒作下沉运动，弯管段颗粒浓度先分两束，后成单束贴壁流
动，最终杂乱分束，在竖直段彻底弥散化，这是由于各管段不同主要作用力所导致。 |
| 英文摘要: |
| In order to study flow regularity of discrete gas-solid flow in thin elbows. Discrete Particle Model ( DPM) and
Reynolds Stress Model ( RSM) were used respectively to describe the gas and solid phase. and the two-way coupling of
gas-solid phase was also considered. In present study, the flow behavior of particles and gas was analyzed, the
distribution of gas pressure, velocity and particle concentration was obtained. and formation mechanism of particle
behavior was also studied. The results indicated that the gas pressure gradually reduced along flow direction. The gas
maximum velocity was distributed along outer wall of bended section. Above all, particles firstly sunk in horizontal
section. formed separate beams at the beginning of bended section . then flow into a single beam along the outer wall and
then split in several random beams, finally uniformly distributed in vertical section . which was caused by different forces
in different sections. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
