| 滕朝晖.1.2085葛利兹模具钢高速铣削参数的正交实验优选[J].轻工机械,2015,33(3): |
| 1.2085葛利兹模具钢高速铣削参数的正交实验优选 |
| Optimization by Orthogonal Experiment on l. 208 5 Groditz Mold Steel High Speed Milling Parameters |
| |
| DOI：I0. 3969/j . issn. 1005 -2895. 2015. 03. 008 |
| 中文关键词: 1. 208 5葛利兹模具钢 表面粗糙度 正交实验 高速加工 精加工 |
| 英文关键词:1.208 5 Groditz mold steel surface roughness orthogonal experimental high-speed machining finish
machining |
| 基金项目: |
|
| 摘要点击次数: 1940 |
| 全文下载次数: 2005 |
| 中文摘要: |
| 针对饮料瓶吹塑模型腔在表面粗糙度方面的要求较高，精加工质量与多个因素相关的情况，提出采用正交实验
方法对加工过程中的切削速度、进给量、径向切削深度、轴向切削深度等要素进行评估，建立加工表面粗糙度与各工艺参
数之间的对应关系，从而确定影响加工质量的主要因素及其规律。研究结果表明，径向切削深度和轴向切削深度是影响
零件表面粗糙度的主要因素，而切削速度和进给量对表面质量的影响相对较小。实验结果有助于生产企业优化工艺参
数、提高生产效率。 |
| 英文摘要: |
| According to the higher requirement of the surface roughness of beverage bottle blow molding cavity and the
high finish machining quality related with multiple factors.the orthogonal experimental method was proposed to evaluate
cutting speed, feed, radial cutting depth, axial cutting depth and other factors. Established the relationship between
surface roughness and process parameters .determined main factors affecting surface quality and its regularity. The results
show that radial cutting depth and axial cutting depth play a more important role than the other two.the influence of
cutting speed and feed on the surface quality is relatively small. The experimental results can be applied in optimizing
process parameters and improving production efficiency. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
