| 马俊杰，江先志.稳压电源的自适应去火弧技术[J].轻工机械,2016,34(5): |
| 稳压电源的自适应去火弧技术 |
| Adaptive Fire Arc Remove Technology Based on Voltage Regulator |
| |
| DOI：10.3969/j.issn.1005-2895.2016.05.011 |
| 中文关键词: 稳压电源 自适应去火弧 闭环继电器控制 零点采集 |
| 英文关键词:voltage regulator adaptive fire arc remove algorithm closed-loop relay control zero point sampling |
| 基金项目:留学回国人员科研启动基金（14022175一C）；浙江理工大学科研启动基金（13022152-Y）。 |
|
| 摘要点击次数: 1619 |
| 全文下载次数: 117 |
| 中文摘要: |
| 针对传统基于继电器控制的稳压电源在带负载工作时，档位切换常常伴随火弧现象的问题，设计了一种可广泛
应用于此类稳压电源上的自适应去火弧技术：使用光耦和多级运放完成对零点和电压电流的采样；基于单片机的10量，
实现对继电器的驱动和控制；基于RCC自激震荡原理为系统提供稳定电源；设计了稳压器的完整软件系统程序，并在软
件中应用自适应去火弧算法。实验结果表明：自适应去火弧技术，能够有效地规避火弧现象的产生，并能够根据条件作
出调整。采用自适应去火弧技术的稳压系统达到了设计目标，延长了系统工作寿命。 |
| 英文摘要: |
| When the traditional regulated power supply based on relay is working, sometimes the switch of relay causes
the fire arc phenomenon. In order to overcome this problem, an adaptive fire arc remove technology was designed which
could be widely used in such kind of voltage stabilizer system. The application of the new technology could be divided.
By using light coupling and multistage op-amp complete, the zero point, current and voltage sampling was achieved.
Based on single chip microcomputer IO quantity, the drive and control of relay was realized. Based on the self-excited
oscillation of RCC principal, a stable power supply to the system was provided. The overall software system of the
stabilizer was designed. And the adaptive fire arc remove algorithm was applied in the software. The experimental results
show that the technology can effectively avoid the fire arc phenomenon and make an adjustment according to the
condition. The working life of voltage stabilizer achieves the design goal, and it lengthen the working life. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
