| 张嘉波1，唐普洪1，许来涛1，丰崇友1，张智明2.质子交换膜燃料电池金属双极板制备工艺研究进展[J].轻工机械,2016,34(6): |
| 质子交换膜燃料电池金属双极板制备工艺研究进展 |
| Research Progress in Metallic Bipolar Plate Preparation of Proton Exchange Membrane Fuel Cell |
| |
| DOI：10.3969/j.issn.1005-2895.2016.06.023 |
| 中文关键词: 质子交换膜燃料电池 金属双极板 硬模冲压工艺 软模冲压工艺 |
| 英文关键词:proton exchange membrane fuel cell( PEMFC ) metallic bipolar plate stamping forming technology of hard
mould stamping forming technology of soft mould |
| 基金项目:国家自然科学基金( 51405344)；中央高校博士点基金（20130072120041）。 |
|
| 摘要点击次数: 2238 |
| 全文下载次数: 2398 |
| 中文摘要: |
| 双极板是质子交换膜燃料电池的核心部件，需求量巨大，金属双极板是新兴的双极板形式。为了初步探寻商品
化制备金属双极板工艺的方向，文章综述了近年来质子交换膜燃料电池金属双极板的制造工艺。将金属双极板制造工
艺分类为减材、增材以及等材3个方面，并对各类工艺优劣进行对比研究；同时从燃料电池金属双极板的商品化角度对
各类制造工艺进行详细分析。提出了硬模和软模冲压工艺是商品化制备金属双极板的可行工艺方法。 |
| 英文摘要: |
| ln order to find an effective method of mass-produced metallic bipolar plate, the forming process of metallic
bipolar plate is used in proton exchange membrane fuel cell in recent years. The processes were classified as additive
manufacturing, subtractive manufacturing and equivalent manufacturing based on the forming methods, and the
similarities and differences of all kinds of forming process were investigated. The forming process of metallic bipolar plate
was analyzed intensively from the points of commercialization. The conclusion is that both hard and soft moulds are the
effective way of mass-produced metallic bipolar plate. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
