| 李 东， 张立强， 陈 阳.基于连续小线段曲率连续全局光顺算法[J].轻工机械,2017,35(4):44-47 |
| 基于连续小线段曲率连续全局光顺算法 |
| Research on Continuous Global Fairing Algorithm Based on Continuous Small Curvature |
| |
| DOI：10.3969/j.issn.1005 2895.2017.04.009 |
| 中文关键词: 曲线加工 插值拟合 全局光顺 B样条插值 G2连续 |
| 英文关键词:curve machining interpolation and fitting global smoothing B spline interpolation G 2 continuous |
| 基金项目: |
|
| 摘要点击次数: 1317 |
| 全文下载次数: 2252 |
| 中文摘要: |
| 小线段所描述的曲线轨迹在相邻线段的转角处，由于在切线方向会发生突变，曲率也不连续，从而导致了刀具加工中，在通过转角处时会发生速度波动和加速度突变。笔者提出一种基于三次B样条插值拟合的连续小线段路径全局光顺算法，对满足转角和弓高误差约束的连续小线段进行插值拟合，使拟合刀具路径达到G2连续，从而有效提高进给速度，改善加工质量，提高加工效率。最后通过仿真实验验证了本文中算法是有效的。 |
| 英文摘要: |
| The tool path described for small segments are discontinuous at the corners of adjacent segments due to abrupt changes in the tangential direction, which will lead to speed fluctuations and abrupt acceleration in the tool processing through the corner. In this paper, a global smoothing algorithm for continuous small line segments based on cubic B spline interpolation was proposed. The interpolation of small continuous line segments should satisfy the constraints of corner and bow height errors, so that the tool path could reach G2 continuous, which could effectively improve the feed rate, improve the processing quality, as well as improve processing efficiency. Finally, the simulation results showed that the algorithm was effective. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
