| 陈新星 ， 童立上 ， 朱理权 ， 马莉锋 ， 李晓莹.自适弹性调整的橘皮破口撕裂机构[J].轻工机械,2018,36(1):8-12 |
| 自适弹性调整的橘皮破口撕裂机构 |
| Self Elasticity Adjustment of Orange Peel Rupture Mechanism |
| |
| DOI：10.3969/j.issn.1005 2895.2018.01.003 |
| 中文关键词: 柑橘橘皮 破口 撕裂 自适应 弹性调整 SolidWorks软件 |
| 英文关键词:food machinery citrus peel break tearing self adapting elastic adjustment SolidWorks |
| 基金项目:国家高技术研究发展计划(863计划)（2011AA100804） |
|
| 摘要点击次数: 1197 |
| 全文下载次数: 1178 |
| 中文摘要: |
| 针对目前柑橘自动剥皮机柑橘橘皮有效刺破率低、剥净橘球的得率低的缺点，课题组提出了一种新型橘皮破口撕裂机构。采用了弹性片结构，设计一种可随动的破口撕皮刀片；设计一种随弹性片运动的控制块，控制块可随柑橘大小、橘皮厚度自适控制破口撕皮刀片的位移量；采用回转拨动结构，设计一种驱动橘球运动的装置；采用 SolidWorks三维仿真建模、SolidWorks Simulations分析，优化橘皮破口撕裂机构。该机构可随柑橘大小、橘皮厚度差异自适弹性调整，能够将柑橘刺破撕裂出数个有效破口。这项研究提升了自动剥皮机剥净橘球的得率。 |
| 英文摘要: |
| Aiming at the shortcomings of low effective rate of citrus orange peel and low yield of orange peel, this paper presents a new type of orange peel rupture mechanism. A kind of control piece with elastic piece movement was designed, and the control block could be used as the control of the citrus size and the thickness of the orange peel, which was a kind of device that drived the orange ball movement. The use of solidworks 3D simulation modeling and Solidworks Simulations analysis, the orange peel rupture mechanism was optimized and enhanced. This body could be adjusted with the citrus size, orange peel thickness difference adaptive elasticity and could tear the citrus pierced a few effective break. This study enhances the automatic peeling machine stripping orange ball yield. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
