欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
徐威, 徐波.空气冷却器单管动力特性与数值模拟研究[J].轻工机械,2018,36(6):89-95
空气冷却器单管动力特性与数值模拟研究
Dynamic Property and Numerical Simulation of Single Tube of Air Cooler
  
DOI:10.3969/j.issn.1005 2895.2018.06.019
中文关键词:  换热管  流固耦合  有限元分析  支撑板  固有频率
英文关键词:heat exchange tube  fluid structure coupling  FEA(finite element analysis)  support plate  natural frequency
基金项目:
作者单位
徐威, 徐波 上海理工大学 能源与动力工程学院 上海200093 
摘要点击次数: 1402
全文下载次数: 1312
中文摘要:
      为研究空气冷却器换热管的振动特性,将内部充满液体的单根换热管作为研究对象,基于流固耦合方法,借助有限元分析软件ANSYS模拟单根换热管在支撑板约束条件下的动力特性,改变支撑板个数及厚度,分析不同结构参数对换热管共振频率的影响。结果表明:同一换热管上设置支撑板数越多,其固有频率越高;跨管数为m的换热管每2m阶固有频率形成一个频率带;支撑板厚度对高阶固有频率及支撑板数较多的换热管固有频率影响较大。因此,可以通过设置支撑板个数及厚度等参数来提高换热管固有频率,降低设备出现故障的几率。
英文摘要:
      In order to explore the vibration property of heat exchange tube of air cooler, a single heat exchange tube filled with liquid inside was studied as the research object, the method of fluid structure coupling was adopted, the finite element analysis software ANSYS was used to simulate the dynamic property of the single heat exchange tube under the constraint of the support plates, analyzed the influence of different structural parameters on the resonant frequency of heat exchange tube by changing the numbers and thicknesses of support plates. The results show that the more support plates set on the same heat exchange tube, the higher the natural frequency is. A frequency band is formed for every 2m orders natural frequencies of the heat exchange tube with a span of m. The thickness of the support plate has a great influence on the natural frequency of high order and the heat exchange tube with more support plate numbers. Therefore, the natural frequency of heat exchange tube can be increased by setting parameters such as number and thickness of support plate, and the failure rate of equipment can be reduced.
查看全文  查看/发表评论  下载PDF阅读器
关闭