| 葛昭， 陆佳平， 何笑颜.六面袋真空包装机技术方案与执行机构设计[J].轻工机械,2020,38(4):43-47 |
| 六面袋真空包装机技术方案与执行机构设计 |
| Technical Program and Mechanism Design of Vacuum Packaging Machine for Cuboid Bag |
| |
| DOI：10.3969/j.issn.1005 2895.2020.04.008 |
| 中文关键词: 真空包装机 六面袋 转位充填 真空腔室 |
| 英文关键词:vacuum packaging machine cuboid bag index filling vacuum chambers |
| 基金项目: |
|
| 摘要点击次数: 730 |
| 全文下载次数: 830 |
| 中文摘要: |
| 针对目前六面袋真空软包装产线中工序衔接不流畅、生产效率低等问题，课题组在现有工艺路线基础上提出了一种通过往复转位充填装置实现2套真空腔室交替工作的技术方案。通过设计工作循环图协调各个工序动作时间，提升整体工艺流畅度；对技术方案所涉关键装置及其执行机构进行原理分析与参数设计以满足工艺要求。结果表明：改进后整机布局合理紧凑，产能提高约66.7%。该设计方案提高了腔室真空软包装自动化水平和工作效率。 |
| 英文摘要: |
| In view of the problems of poor process connection and low production efficiency in the cuboid bag vacuum flexible packaging production line, based on the existing process route, an innovative technical scheme was proposed to realize the alternating work of two sets of vacuum chambers through a reciprocating indexing filling device. Coordinated the operation time of each process by designing the work cycle diagram to improve the overall process fluency. The principle analysis and parameter design of the key devices and their implementing agencies involved in the technical solution were performed to meet the process requirements. The layout of the whole machine was reasonable and compact, the production capacity was increased by about 66.7%. The automation level and working efficiency of the vacuum soft packaging of the chamber are improved. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
