欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
刘唐京, 王企鲲, 邹赫.弯曲通道内黏弹性流体二次流现象的数值研究[J].轻工机械,2022,40(1):1-6
弯曲通道内黏弹性流体二次流现象的数值研究
Numerical Study of Secondary Flow Phenomenon of Viscoelastic Fluid in Curved Channel
  
DOI:10.3969/j.issn.1005 2895.2022.01.001
中文关键词:  黏弹性流体  二次流  弯管  Giesekus模型
英文关键词:viscoelastic fluid  secondary flow  bend pipe  Giesekus model
基金项目:教育部博士点基金资助项目(20113120120003)。
作者单位
刘唐京, 王企鲲, 邹赫 1.上海理工大学 能源与动力工程学院 上海200093 2.上海理工大学 上海市动力工程多相流动与传热重点实验室 上海200093 
摘要点击次数: 1011
全文下载次数: 880
中文摘要:
      流体流经弯曲通道在其截面上会产生二次流现象,而黏弹性流体和牛顿流体有着不同的流动特性,流体的黏弹性对弯管内二次流能起到强化作用。为了探究黏弹性流体对弯管内二次流的影响因素,课题组采用FLUENT软件对弯曲通道中黏弹性流体的二次流特性进行数值模拟,流体的黏弹性通过UDF来实现;研究了魏森贝格数Wi、溶质黏度比β以及管道的几何结构对黏弹性流体二次流强度的影响。模拟结果表明:Wi数对弯道中的二次流强度存在非单调关系;流体的黏性越大,管内主流速度越大,从而加强管道内二次流效应;通道的几何结构如曲率比、弯道的个数对二次流都有较大的影响,曲率比越大,管内二次流越强。弯管内二次流的研究,对工程中利用弯管来加强对流和换热有一定参考意义。
英文摘要:
      Fluid flowing through a curved channel will produce a secondary flow phenomenon on its cross section. Viscoelastic fluid and Newtonian fluid have different flow characteristics. The viscoelasticity of the fluid can strengthen the secondary flow in the bend pipe. In order to explore the influence factors of the viscoelastic fluid on the secondary flow in the bend pipe, the FLUENT software was used to numerically simulate the secondary flow characteristics of the viscoelastic fluid in the bend pipe, and the viscoelasticity of the fluid was realized by UDF. The effects of Weisenberg number Wi, solute viscosity ratio β, and pipe geometry on the strength of the secondary flow of viscoelastic fluid were studied. The simulation results show that there is a non monotonic relationship between the Wi number and the intensity of the secondary flow in the pipe. The greater the viscoelasticity of the fluid, the greater the velocity of the main flow in the pipe, thereby enhancing the secondary flow effect in the pipe. The geometric structure of the channel such as the curvature ratio and the number of bends have a greater impact on the secondary flow. The greater the curvature ratio, the stronger the secondary flow in the pipe. The study of secondary flow in bend pipe has certain reference significance for strengthening convection and heat transfer by using bend pipe in engineering.
查看全文  查看/发表评论  下载PDF阅读器
关闭