| 金珍珍， 梅武军， 周卫华， 林海波.基于FPGA和单片机的孔径测量系统[J].轻工机械,2022,40(1):71-77 |
| 基于FPGA和单片机的孔径测量系统 |
| Aperture Measurement System Based on FPGA and MCU |
| |
| DOI：10.3969/j.issn.1005 2895.2022.01.012 |
| 中文关键词: 孔径测量系统 线阵电荷耦合元件 STM32单片机 现场可编程逻辑门阵列 |
| 英文关键词:aperture measurement system linear CCD（Charge Coupled Device） STM32 MCU（Microcontroller Unit） FPGA（Field Programmable Gate Array） |
| 基金项目:2020年浙江省教育厅访问工程师项目（FG2020225）；2021 年浙江省教育厅一般科研项目（Y202147317）；2020年台州职业技术学院校级课题（2021YB06）；浙江省公益技术研究计划资助项目 (LGG20E050005)。 |
|
| 摘要点击次数: 857 |
| 全文下载次数: 655 |
| 中文摘要: |
| 针对当前孔径测量系统检测速度不够高和不可灵活定制的不足，课题组提出了基于现场可编程逻辑门阵列（Field Programmable Gate Array，FPGA）和单片机的孔径测量系统。课题组设计了孔径测量系统的硬件结构，介绍了该系统的核心模块控制原理；采用电荷耦合元件（charge coupled device，CCD）线阵传感器实现了光电信号的转换，设计了激光信号产生模块、基于FPGA的时序驱动模块、AD转换模块和电源管理模块；利用STM单片机实现算法优化及数据处理与显示；最后，设计了孔径测量系统的软件，并制作了样机。应用结果表明：该系统不仅具有精度高、成本低等特点，且可以模块化设计，易拓展，能有效提高孔径测量系统的检测速度，可根据实际生产需求灵活定制。 |
| 英文摘要: |
| Aiming at the shortcomings of low detection speed and inflexible customization of the current aperture measurement system, an aperture measurement system based on FPGA and MCU was proposed. The hardware structure of the aperture measurement system was designed and the core module control principle of the system was introduced. The photoelectric signal conversion was achieved by CCD linear sensor, and the laser signal generation module, timing drive module based on FPGA, AD conversion module and power management module were designed. Finally, the algorithm optimization and the data processing and display were realized by STM MCU.The software of aperture measurement system was designed and a specific prototype was fabricated. The application results show that the system not only has the characteristics of high precision and low cost, but also can be modular designed and easy to expand. It can effectively improve the detection speed of the aperture measurement system and can be flexibly customized according to the actual production requirements. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
