欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
崔英, 彭来湖, 戴宁, 刘宜胜, 项展.无缝内衣机斜齿轮与下主同步带传动机构振动特性[J].轻工机械,2022,40(4):62-70
无缝内衣机斜齿轮与下主同步带传动机构振动特性
Vibration Characteristics of Helical Gear and Lower Main Synchronous Belt Transmission Mechanism of Seamless Underwear Machine
  
DOI:10.3969/j.issn.1005 2895.2022.04.011
中文关键词:  无缝内衣机  斜齿轮传动机构  下主同步带传动机构  振动  振动加速度传感器
英文关键词:seamless underwear machine  helical gear transmission mechanism  lower main synchronous belt transmission
基金项目:浙江省博士后科研项目择优资助一等资助(ZJ2021038 );浙江省博士后科研项目特别资助(ZJ2020004)。
作者单位
崔英, 彭来湖, 戴宁, 刘宜胜, 项展 1.浙江理工大学 浙江省现代纺织装备技术重点实验室 浙江 杭州310018 
摘要点击次数: 299
全文下载次数: 288
中文摘要:
      为了探究无缝内衣机中传动机构的选择与位置的安放对整机运转的影响,课题组结合无缝内衣机的编织工艺,深入分析整机传动机理,对传动机构中典型部件——斜齿轮传动机构和下主同步带传动机构建立了振动力学模型;利用振动加速度传感器采集2种传动机构在x向,y向和z向上的振动频率信号,进行理论分析和实验验证;最后再对典型传动机构的振动特性进行分析与对比。结论表明:理论与实验2种方式的结论一致,斜齿轮传动机构中螺旋角使其适合与传递载荷量较大的针筒齿轮进行啮合传动;而同步带传动机构3向振动平稳,适合远距离传输。研究成果为从振动层面分析传动机构的选择安装提供了参考和实验依据。
英文摘要:
      To investigate the influence of the selection and location of the transmission mechanism on the operation of the seamless underwear machine, combined with the knitting process of the seamless underwear machine, the transmission mechanism of the whole machine was deeply analyzed, and the vibration mechanical models of the typical parts of the transmission mechanism the helical gear transmission mechanism and the lower main synchronous belt transmission mechanism were established. The vibration frequency signals of the two transmission mechanisms in the x direction, y direction and z direction were collected by the vibration acceleration sensor for theoretical analysis and experimental verification. Finally, the vibration characteristics of typical transmission mechanisms were analyzed and compared. The results show that the theoretical and experimental conclusions are consistent. The helix angle of the helical gear transmission mechanism makes it suitable for meshing transmission with the syringe gear that transmits a large amount of load; while the synchronous belt transmission mechanism three way vibration is stable and suitable for transmission with a relatively long distance. The research results provide reference and experimental basis for the analysis of the selection and installation of the transmission mechanism from the vibration level.
查看全文  查看/发表评论  下载PDF阅读器
关闭