欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
王博, 张钰波, 刘宝庆.双轴搅拌对晶粒降温结晶的影响[J].轻工机械,2023,41(2):1-9
双轴搅拌对晶粒降温结晶的影响
Influence of Coaxial Mixer on Cooling Crystallization
  
DOI:10.3969/j.issn.1005 2895.2023.02.001
中文关键词:  双轴搅拌  降温结晶  晶体形貌  粒度分布
英文关键词:coaxial mixer  cooling crystallization  crystal morphology  size distribution
基金项目:国家自然科学基金(21978255) 。
作者单位
王博, 张钰波, 刘宝庆 浙江大学 化工机械研究所 浙江 杭州310027 
摘要点击次数: 460
全文下载次数: 284
中文摘要:
      工业结晶过程中,一般希望结晶产物具有均匀的粒度和规则的晶形。考虑到带有外桨的双轴搅拌器能有效促进结晶过程的传质与传热,因此课题组以双轴搅拌器作为研究对象,通过实验考察了转速、桨型以及内外桨搅拌模式等参数对结晶产物粒度分布及晶型晶貌的影响;根据不同转速下测得的晶体成核生长动力学参数,建立氯化钾结晶成核速率与生长速率的预测公式。结果表明:双轴搅拌得到的晶体中值粒径明显高于单轴搅拌,但由于外桨的存在,使得粒度分布离散度变大;存在一个最佳转速使晶体中值粒径达到最大且粒度分布较为集中;内外桨同转、桨叶选用轴流桨或混流桨时更适用于结晶操作。氯化钾结晶成核速率与生长速率的预测公式为工业结晶提供一定的理论参考。
英文摘要:
      In the process of industrial crystallization, it is generally expected that the crystal products have uniform particle size and regular crystal shape. Considering the coaxial mixer with outer blade can effectively promote mass and heat transfer in the crystallization process, the effects of parameters such as rotation speed, agitator blade type and stirring mode of inner and outer blade on crystal size distribution and crystal morphology of crystallization products by taking the coaxial mixer as the research object. In addition, the predictive formula of nucleation and growth rate of potassium chloride was established according to the kinetic parameters of crystal nucleation growth measured at different rotational speed. The results show that the median crystal size obtained by coaxial mixer is significantly higher than that of uniaxial stirring, but the dispersion of crystal distribution increases due to the presence of outer blade;there is an optimal rotation speed to maximize the crystal size and make the crystal size distribution more concentrated; it is more suitable for crystallization operation when the inner and outer blades are rotating in the same direction with the axial flow or mixed flow blades. The predictive formula of nucleation and growth rate of potassium chloride can provide certain theoretical reference for industrial crystallization.
查看全文  查看/发表评论  下载PDF阅读器
关闭