欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
孟琳1, 于苏扬2, 王兆满2, 郭万金2*.电梯包覆带曳引传动力学特性[J].轻工机械,2024,42(4):63-68
电梯包覆带曳引传动力学特性
Mechanical Property of Elevator Coated Belt Traction Driving
  
DOI:10.3969/j.issn.1005 2895.2024.04.009
中文关键词:  电梯包覆带  理论应变模型  曳引传动  力学特性  ABAQUS软件
英文关键词:elevator coated belt  theoretical strain model  traction driving  mechanical property  ABAQUS
基金项目:河南省重点研发与推广专项(科技攻关)项目(232102320051);河南省重点研发与推广专项(科技攻关)项目(222102320417);河南省市场监督管理局科技计划项目(2022sj145);河南省市场监督管理局科技计划项目(2020sj78)。
作者单位
孟琳1, 于苏扬2, 王兆满2, 郭万金2* 1.河南省特种设备检验技术研究院 河南 郑州450000  2.长安大学 道路施工技术与装备教育部重点实验室 陕西 西安710064 
摘要点击次数: 114
全文下载次数: 181
中文摘要:
      电梯包覆带作为一种新型曳引装置,在提升过程中会承受拉伸、冲击及振动等多种载荷。为了探究包覆带应力应变状态对电梯安全性能的影响,课题组建立了包覆带侧丝轴向拉伸应变的理论应变模型,对电梯包覆带曳引传动力学特性开展仿真分析;通过ABAQUS软件进行了有限元仿真来验证所提出的理论应变模型的正确性。研究结果表明:承载体钢丝绳侧丝的缠绕角变化是影响包覆带安全工作的重要因素;包覆带内部张力分布不均匀,其应力大小随着空间位置发生变化;包覆带的应力主要分布在内部钢丝绳上,发生应变的部位主要是内部钢丝绳的侧丝,包覆层随着钢丝绳侧丝的扭转而出现微小位移。
英文摘要:
      The elevator coated belt ,as a new kind of traction device, will bear various loads such as tensile, impact and vibration in the process of lifting. In order to explore the influence of the stress strain state of the elevator coated belt on elevator safety performance, a theoretical strain model of the axial tensile strain of the side wire of the coated belt was proposed. The mechanical property of elevator coated belt traction driving was simulated and analyzed. The finite element simulation was carried out by ABAQUS software to verify the correctness of the theoretical strain model .The results show that the change of the winding angle of the side wire of the steel wire rope is an important factor affecting the safe operation. The internal tension distribution of the covering belt is not uniform, and the stress value varies with the spatial position . The main stress of the coated belt is mainly distributed on the inner wire rope, and the strain occurs on the side wire of the inner wire rope. Meanwhile, the coating layer has a slight displacement with the torsion of the side wire of the wire rope.
查看全文  查看/发表评论  下载PDF阅读器
关闭